YesWelder FLUX-135PRO
#1 in 120 VFull review
A cheap, light flux core welder for beginners doing repairs on a 120 V outlet. It adds stick and lift TIG for little money, but it cannot run gas MIG.
Amazon $109.99$109.99
The YesWelder FLUX-135PRO is the better MIG welder overall, rated 4.0 to 3.1. The YesWelder FLUX-135PRO leads on value and processes. The Lincoln Weld-Pak 90i FC wins on warranty. The YesWelder FLUX-135PRO costs $218.01 less ($109.99 vs $328).
Lincoln Weld-Pak 90i FC
#6 in 120 VFull review
A light, cheap flux core welder for occasional repairs around the house and farm. Buy the 90i MIG instead if you might want gas welding later.
Amazon $328$328
Prices were last checked November 1, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Which should you buy?
- Choose the YesWelder FLUX-135PRO for value ($0.81 per amp ($109.99, 135 A maximum) vs $2.73 per amp ($328, 120 A maximum)) and processes (Flux-core, stick, lift TIG vs Flux-core).
- Choose the Lincoln Weld-Pak 90i FC for warranty (3-year warranty on the machine vs 2-year warranty on the machine).
Scores side by side
Each factor is scored 0-100 against the same fixed reference points for every 120 V MIG welder; a clear win is highlighted. How we rank explains each one.
| Factor weight | YesWelder FLUX-135PRO | Lincoln Weld-Pak 90i FC |
|---|---|---|
| Overall rating | 4.0/5 | 3.1/5 |
| Value 30% | 100 $0.81 per amp ($109.99, 135 A maximum) | 61 $2.73 per amp ($328, 120 A maximum) |
| Duty cycle 20% | 100 60% at full output (135 A) | 28 30% at 90 A, about 17% at full output |
| Processes 15% | 40 Flux-core, stick, lift TIG | 0 Flux-core |
| Weight 10% | 100 11 lb | 100 15 lb |
| Warranty 25% | 25 2-year warranty on the machine | 50 3-year warranty on the machine |
Specifications
| YesWelder FLUX-135PRO | Lincoln Weld-Pak 90i FC | |
|---|---|---|
| Output | ||
| Input voltage | 120 V | 120 V |
| Maximum output | 135 A | 120 A |
| Rated duty cycle | 60% at 135 A | 30% at 90 A |
| Thickest steel, one pass | 0.188 in | 0.25 in |
| Processes and wire | ||
| Gas MIG | No | No |
| Stick | Yes | No |
| TIG | Lift TIG | No |
| Spool gun ready | No | No |
| Wire sizes | 0.03 to 0.035 in | 0.03 to 0.035 in |
| Synergic settings | Yes | No |
| Build | ||
| Weight | 11 lb | 15 lb |
| Warranty | 2 years | 3 years |