YesWelder FLUX-135PRO

Last updated: November 1, 2026

YesWelder FLUX-135PRO
4.0/5#1 of 10 in 120 V welders
4.0

A cheap, light flux core welder for beginners doing repairs on a 120 V outlet. It adds stick and lift TIG for little money, but it cannot run gas MIG.

  • 135 AOutput
  • 60% at 135 ADuty cycle
  • Flux-core, stick, lift TIGProcesses
  • 120 VInput
Check price at Amazon$109.99

Price checked November 1, 2026. As an Amazon Associate we earn from qualifying purchases.

Pros
  • Runs off a household outlet and weighs about 11 lb, easy to carry to the job
  • No gas bottle needed for outdoor repairs on fences, trailers and farm gear
  • Also does stick, and lift TIG with an add on torch
  • Holds full 135 A output for 6 minutes in 10 by the maker rating
Cons
  • Flux core only, so welds need slag chipping and look rougher than gas MIG
  • No spool gun option, so no aluminum wire welding
  • Tops out at 3/16 in steel in one pass

How it scores

The rating comes from 5 measured or published factors, each scored 0-100 against fixed reference points for its input voltage. How we rank explains each one.

Specifications

Model numberFLUX-135PRO
Output
Input voltage120 V
Maximum output135 A
Rated duty cycle60% at 135 A
Thickest steel, one pass0.188 in
Processes and wire
Gas MIGNo
StickYes
TIGLift TIG
Spool gun readyNo
Wire sizes0.03 to 0.035 in
Synergic settingsYes
Build
Weight11 lb
Warranty2 years

Alternatives in this input voltage

Compare

Compare the YesWelder FLUX-135PRO with any other MIG welder →

More from YesWelder: every YesWelder product ranked.