VEVOR CUT-50
#19 in Over 45 AFull review
A cheap 50 A pilot arc cutter for hobbyists cutting sheet and steel up to 1/2 in now and then. Its short duty cycle and high-frequency start make it a poor fit for heavy or CNC work.
Amazon $198.90$198.90
The VEVOR CUT-50 is the better plasma cutter overall, rated 3.3 to 3.0. The VEVOR CUT-65 Non-HF wins on cut. The VEVOR CUT-50 costs $61 less ($198.90 vs $259.90).
VEVOR CUT-65 Non-HF
#21 in Over 45 AFull review
A low-cost 65 A pilot arc cutter for occasional home and farm cuts in steel up to 5/8 in. Buyers who cut plate for long stretches should look at a machine with a higher duty cycle.
Amazon $259.90$259.90
Prices were last checked November 2, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Which should you buy?
- Choose the VEVOR CUT-65 Non-HF for cut (5/8 in rated cut on mild steel vs 1/2 in rated cut on mild steel).
Scores side by side
Each factor is scored 0-100 against the same fixed reference points for every over 45 A plasma cutter; a clear win is highlighted. How we rank explains each one.
| Factor weight | VEVOR CUT-50 | VEVOR CUT-65 Non-HF |
|---|---|---|
| Overall rating | 3.3/5 | 3.0/5 |
| Value 30% | 100 $397.80 per inch of rated cut ($198.90, 1/2 in) | 99 $415.84 per inch of rated cut ($259.90, 5/8 in) |
| Cut 20% | 0 1/2 in rated cut on mild steel | 17 5/8 in rated cut on mild steel |
| Duty cycle 15% | 0 20% at full output (50 A) | 0 20% at full output (65 A) |
| Pilot arc 10% | 100 pilot arc | 100 pilot arc |
| Warranty 25% | 50 warranty not published (neutral score used) | 0 1-year warranty on the machine |
Specifications
| VEVOR CUT-50 | VEVOR CUT-65 Non-HF | |
|---|---|---|
| Cutting | ||
| Input voltage | 120/240 V | 120/240 V |
| Maximum output | 50 A | 65 A |
| Rated cut, mild steel | 1/2 in | 5/8 in |
| Sever cut, mild steel | 5/8 in | 3/4 in |
| Rated duty cycle | 20% at 50 A | 20% at 65 A |
| Pilot arc | Yes | Yes |
| Arc start | High frequency | Blowback |
| Air and build | ||
| Air supply | 95 psi | 95 psi |
| CNC port | No | No |
| Weight | 19.4 lb | 19.2 lb |
| Warranty | - | 1 year |