Everlast PowerPlasma 62i
#2 in Over 45 AFull review
For a 240 V shop cutting 1/2 to 1 in steel for trailers and farm repairs, with room to add a CNC table later. Its long duty cycle suits long cuts.
Amazon $999$999
4.7/5
For a fabrication or farm shop that regularly cuts 3/4 to 1 in steel and has the 240 V power and compressor to feed it. It costs far less than the big brand 80 A machines.
- 80 AOutput
- 1 1/4 inRated cut
- 60% at 80 A, 40 °CDuty cycle
- 240 VInput
Check price at Amazon$1,269
Price checked November 2, 2026. As an Amazon Associate we earn from qualifying purchases.
Pros
- Cuts 1 in plate as a daily job, so heavy farm and fabrication work goes quickly
- Runs 60% of the time at full 80 A output
- Blowback pilot arc handles rusty, painted and expanded metal without high frequency noise
- Five year warranty on the machine
Cons
- Needs a 240 V circuit and a large compressor (about 9 cfm with a 60 gallon tank)
- At 53 lb it is a shop machine, not one to carry around
- Torch is covered for only six months
The Everlast PowerPlasma i family
Every Everlast PowerPlasma i model we rank, smallest first. Ratings compare each against its own size.
| Model | Output | Rating | Price |
|---|---|---|---|
| Everlast PowerPlasma 52i | 50 A | 4.2/5 | $799 |
| Everlast PowerPlasma 62i | 60 A | 4.4/5 | $999 |
| Everlast PowerPlasma 82i (this one) | 80 A | 4.7/5 | $1,269 |
How it scores
The rating comes from 5 measured or published factors, each scored 0-100 against fixed reference points for its size. How we rank explains each one.
Specifications
| Model number | PP-82i |
|---|---|
| Cutting | |
| Input voltage | 240 V |
| Maximum output | 80 A |
| Rated cut, mild steel | 1 1/4 in |
| Sever cut, mild steel | 1 7/16 in |
| Rated duty cycle | 60% at 80 A, 40 °C |
| Pilot arc | Yes |
| Arc start | Blowback |
| Air and build | |
| Air supply | 8 cfm, 75 psi |
| CNC port | Yes |
| Weight | 53 lb |
| Warranty | 5 years |
Alternatives in this size
Everlast PowerPlasma 52i
#3 in Over 45 AFull review
For a home or farm shop cutting up to 1/2 in steel on 240 V that wants a pilot arc and a long warranty. The dual voltage input lets it trim sheet metal on a household outlet too.
Amazon $799$799
Everlast Hatchet 60
#4 in Over 45 AFull review
For a hand-cutting home or farm shop that wants a 60 A pilot arc cutter on a budget, with 120 V use for thin metal. It is not for CNC tables or long continuous cuts.
Amazon $659 Everlast $649$649
Compare
Compare the Everlast PowerPlasma 82i with any other plasma cutter →
More from Everlast: every Everlast product ranked.