Everlast PowerPlasma 62i
#2 in Over 45 AFull review
For a 240 V shop cutting 1/2 to 1 in steel for trailers and farm repairs, with room to add a CNC table later. Its long duty cycle suits long cuts.
Amazon $999$999
The Everlast PowerPlasma 62i is the better plasma cutter overall, rated 4.4 to 3.7. The Everlast PowerPlasma 62i leads on warranty. The PrimeWeld CUT60 costs $300 less ($699 vs $999).
PrimeWeld CUT60
#9 in Over 45 AFull review
For a home shop that wants one dual voltage 60 A cutter for hand work now and a CNC table later. Good value if three years of cover is enough.
Amazon $699$699
Prices were last checked November 2, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Which should you buy?
- Choose the Everlast PowerPlasma 62i for warranty (5-year warranty on the machine vs 3-year warranty on the machine).
Scores side by side
Each factor is scored 0-100 against the same fixed reference points for every over 45 A plasma cutter; a clear win is highlighted. How we rank explains each one.
| Factor weight | Everlast PowerPlasma 62i | PrimeWeld CUT60 |
|---|---|---|
| Overall rating | 4.4/5 | 3.7/5 |
| Value 30% | 69 $999 per inch of rated cut ($999, 1 in) | 50 rated cut not published (neutral score used) |
| Cut 20% | 67 1 in rated cut on mild steel | 50 rated cut not published (neutral score used) |
| Duty cycle 15% | 100 60% at full output (60 A) | 100 60% at full output (60 A) |
| Pilot arc 10% | 100 pilot arc | 100 pilot arc |
| Warranty 25% | 100 5-year warranty on the machine | 50 3-year warranty on the machine |
Specifications
| Everlast PowerPlasma 62i | PrimeWeld CUT60 | |
|---|---|---|
| Cutting | ||
| Input voltage | 240 V | 120/240 V |
| Maximum output | 60 A | 60 A |
| Rated cut, mild steel | 1 in | - |
| Sever cut, mild steel | 1 1/4 in | 7/8 in |
| Rated duty cycle | 60% at 60 A, 40 °C | 60% at 60 A, 40 °C |
| Pilot arc | Yes | Yes |
| Arc start | Blowback | Blowback |
| Air and build | ||
| Air supply | 5 cfm, 75 psi | 5 cfm, 75 psi |
| CNC port | Yes | Yes |
| Weight | 53 lb | 30 lb |
| Warranty | 5 years | 3 years |