PrimeWeld CUT60
#9 in Over 45 AFull review
For a home shop that wants one dual voltage 60 A cutter for hand work now and a CNC table later. Good value if three years of cover is enough.
Amazon $699$699
The PrimeWeld CUT60 is the better plasma cutter overall, rated 3.7 to 3.2. The PrimeWeld CUT60 leads on duty cycle. The PrimeWeld CUT60 costs $3,218 less ($699 vs $3,917).
Miller Spectrum 875
#20 in Over 45 AFull review
A 60 A shop cutter for farms and fabricators who cut thick plate often and want Miller build and service. Home users who cut mostly sheet and 1/4 in steel do not need this much machine.
Cyberweld $3,917$3,917
Prices were last checked November 2, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Which should you buy?
- Choose the PrimeWeld CUT60 for duty cycle (60% at full output (60 A) vs 50% at full output (60 A)).
Scores side by side
Each factor is scored 0-100 against the same fixed reference points for every over 45 A plasma cutter; a clear win is highlighted. How we rank explains each one.
| Factor weight | PrimeWeld CUT60 | Miller Spectrum 875 |
|---|---|---|
| Overall rating | 3.7/5 | 3.2/5 |
| Value 30% | 50 rated cut not published (neutral score used) | 19 $4,476.57 per inch of rated cut ($3,917, 7/8 in) |
| Cut 20% | 50 rated cut not published (neutral score used) | 50 7/8 in rated cut on mild steel |
| Duty cycle 15% | 100 60% at full output (60 A) | 75 50% at full output (60 A) |
| Pilot arc 10% | 100 pilot arc | 100 pilot arc |
| Warranty 25% | 50 3-year warranty on the machine | 50 3-year warranty on the machine |
Specifications
| PrimeWeld CUT60 | Miller Spectrum 875 | |
|---|---|---|
| Cutting | ||
| Input voltage | 120/240 V | 240 V |
| Maximum output | 60 A | 60 A |
| Rated cut, mild steel | - | 7/8 in |
| Sever cut, mild steel | 7/8 in | 1 1/4 in |
| Rated duty cycle | 60% at 60 A, 40 °C | 50% at 60 A, 40 °C |
| Pilot arc | Yes | Yes |
| Arc start | Blowback | Blowback |
| Air and build | ||
| Air supply | 5 cfm, 75 psi | 6.8 cfm, 90 psi |
| CNC port | Yes | - |
| Weight | 30 lb | 48 lb |
| Warranty | 3 years | 3 years |