JET JCDC-3
#1 in CycloneFull review
A 3 HP cyclone for a ducted shop that puts warranty first. Grizzly and Laguna offer more suction for less money.
Amazon $2,914$2,914
A dust collector pulls chips and dust from a table saw, planer or jointer through a 4 in or larger hose or duct and catches them in a bag or drum. These rankings compare what the makers publish on the same terms: how much air it moves for the money, how hard it pulls against a long hose, how fine a particle its filter stops and how long it’s covered.
Build is the first choice. A single-stage collector pulls everything through the impeller into a bag; it’s cheaper and smaller, but fine dust reaches the filter and suction drops as it clogs. A cyclone spins chips out into a drum before the air reaches the filter, so suction holds steadier and the filter needs cleaning less often, at a much higher price.
Filter is the second. A cloth bag rated at 5 or 30 micron catches chips but lets the finest dust, the part that stays in the air and in your lungs, back into the shop. A pleated canister rated at 1 or 2 micron, or a HEPA filter, keeps it in.
Power supply is the third. Collectors up to about 1.5 HP plug into a standard 120 V outlet; most 2 and 3 HP machines need a 240 V circuit.
Top Picks
WEN DC3401
#9 in Single-stageFull review
A starter collector for a small shop that runs one benchtop tool at a time and wants chips off the floor for little money.
Amazon $126.35$126.35
Laguna P|Flux 1
#6 in CycloneFull review
A 120 V HEPA cyclone for a woodworker who puts lung health first and works in a closed shop. It’s expensive for its airflow.
Amazon $3,499$3,499
Shop by Build
Single-stage
18 rankedBag and canister collectors that pull chips straight through the impeller: cheap and compact.
Top rated: JET DC-1200VX-CK1 $1,099
Cyclone
9 rankedTwo-stage collectors that spin chips out into a drum before the filter: steadier suction, less filter cleaning.
Top rated: JET JCDC-3 $2,914
Narrow It Down
Prices were last checked November 2, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Best Single-Stage Dust Collectors
- JET DC-1200VX-CK1#1 of 18Full review
A well built 2 HP canister collector with a long warranty for a shop with 240 V that wants single stage simplicity.
Amazon $1,099$1,0991,200 cfm2 micron2 HP - Shop Fox W1685#2 of 18Full review
A cheap, strong bag collector for a hobby shop on 120 V that mostly needs to keep up with a planer and table saw.
Grizzly $470$4701,280 cfm2.5 micron1.5 HP - Grizzly G0548ZP#3 of 18Full review
A strong, cheap 2 HP canister collector for a shop with 240 V that wants high airflow and fine filtration without paying for a cyclone.
Grizzly $755$7551,700 cfm1 micron2 HP - Powermatic PM1900TX-CK1#4 of 18Full review
A big single stage collector for a shop that needs lots of airflow and wants Powermatic’s five year warranty. A cyclone at the same price handles fine dust better.
Amazon $2,199$2,1991,891 cfm2 micron3 HP - WEN DC1300#5 of 18Full review
A low cost full size bag collector for a hobby shop that wants planer and saw chips handled on a 120 V circuit.
Amazon $391.80$391.801,300 cfm5 micron-
Best Cyclone Dust Collectors
- JET JCDC-3#1 of 9Full review
A 3 HP cyclone for a ducted shop that puts warranty first. Grizzly and Laguna offer more suction for less money.
Amazon $2,914$2,9141,963 cfm1 micron3 HP - JET JCDC-1.5#2 of 9Full review
A 120 V cyclone with a long warranty for a garage shop without a 240 V circuit. It costs more than the Grizzly but is covered five times as long.
Amazon $1,831.62$1,831.621,259 cfm1 micron1.5 HP - Laguna C|Flux 3#3 of 9Full review
A big cyclone for a ducted shop running several large machines. Its rated airflow tops the list for the price.
Amazon $2,999$2,9992,718 cfm1 micron3 HP - Grizzly G0862#4 of 9Full review
A 3 HP cyclone for a serious home or small pro shop with ducting to several machines. It gives near top airflow for far less than JET or Laguna.
Amazon $2,920 Grizzly $2,180$2,1801,941 cfm1 micron3 HP - Laguna C|Flux 1#5 of 9Full review
A polished 120 V cyclone for a garage shop that wants a well documented machine with a remote. The Grizzly G0860 does similar work for much less.
Amazon $2,399$2,3991,314 cfm1 micron1.5 HP
How We Rank
Each collector is ranked against others of the same build, and scored on its price per cfm, its airflow, its static pressure, how fine its filter catches and its warranty.
| Factor | Measures | Weight |
|---|---|---|
| Value | price per cfm of maximum airflow | 30% |
| Airflow | maximum airflow | 15% |
| Suction | maximum static pressure | 10% |
| Filtration | finest particle the filter catches | 25% |
| Warranty | warranty length | 20% |
How we rank explains each factor in full.