A diode laser engraver uses a blue semiconductor laser, from about 5 W to 60 W of optical output, and runs from a wall adapter. Open frame machines are cheap and have big beds but need safety glasses and good ventilation; enclosed machines cost more and keep the beam and smoke inside. Diodes engrave wood, leather, slate and coated metal and cut plywood, but the beam passes through clear acrylic and glass, so they can’t cut those. Some add a small infrared laser for marking bare metal and plastic; only the diode’s output is scored.
Prices were last checked November 2, 2026 and are subject to change; the price and availability shown by the retailer at the time of purchase apply.
Full ranking 18
- Creality Falcon2 Pro S 40W#1 of 18Full review
An enclosed, autofocusing 40 W laser with a camera for small shops that want speed without CO2 upkeep. The best fit when cutting thick wood matters.
Amazon $1,349$1,34940 W355 x 390 mmYes - Creality Falcon2 Pro 60W#2 of 18Full review
The most cutting power in an enclosed diode machine, for small shops cutting thick wood all day. Hobbyists who mostly engrave will not use the extra power.
Amazon $1,899$1,89960 W400 x 400 mmYes - Creality Falcon2 Pro S 22W#3 of 18Full review
An enclosed, autofocusing 22 W laser with a camera for small shops that want speed without CO2 upkeep. Pick it over the 40 W if you mostly engrave.
Amazon $899$89922 W355 x 390 mmYes - xTool M2 20W#4 of 18Full review
The enclosed M2 with twice the cutting power, for home crafters who cut plywood and leather often. It suits a shared room where an open laser would not.
Amazon $899$89920 W426 x 320 mmYes - Atomstack A40 Pro V2#5 of 18Full review
A cheap route to serious diode cutting power for a garage or shop with good ventilation. Not for a shared living space without an enclosure.
Amazon $719.99$719.9948 W385 x 400 mmNo - xTool M2 10W#6 of 18Full review
A safe, enclosed starter laser for crafters who want camera placement and print then cut at a low price. Choose the 20 W version if you cut wood often.
Amazon $499$49910 W426 x 320 mmYes - Twotrees TS2 40W#7 of 18Full review
A budget open frame cutter for garage makers who want high power on a big bed and can set up their own safety and ventilation.
Amazon $800.75$800.7540 W450 x 410 mmNo - Creality Falcon A1 Pro#8 of 18Full review
For home crafters who want an enclosed, camera guided 20 W engraver that focuses itself. Pay more per watt than open frames for the safety and convenience.
Amazon $1,099$1,09920 W358 x 268 mmYes - Ortur R2 10W#9 of 18Full review
The cheapest way to get an enclosed, camera guided laser for small engraving jobs at home. Its bed is too small for signs.
Amazon $349.99$349.9910 W300 x 210 mmYes - Creality Falcon A1 10W#10 of 18Full review
A safe, ready to use enclosed engraver for beginners who want camera placement on a budget. Buyers who cut thick wood should look at 20 W or more.
Amazon $549$54910 W381 x 305 mmYes - xTool S1 40W#11 of 18Full review
A powerful enclosed diode laser for hobby shops and small sellers who cut a lot of wood and want a big bed. Budget for the air assist pump.
Amazon $1,699$1,69940 W498 x 319 mmYes - Atomstack A20 Pro V2#12 of 18Full review
A cheap 20 W open frame laser for hobbyists who want to cut 3 mm plywood and engrave quickly. Budget for air assist.
Amazon $389.99 AtomStack $369$36920 W400 x 365 mmNo - Sculpfun SF-A9 40W#13 of 18Full review
For hobbyists who want 40 W of cutting power with air assist in an open frame. The Amazon bundle price is high next to rivals.
Amazon $1,559$1,55940 W400 x 400 mmNo - Longer Ray5 10W#14 of 18Full review
A cheap 10 W open frame engraver with a touch screen for hobbyists who want to run jobs offline.
Amazon $268.99$268.9910 W400 x 400 mmNo - Sculpfun S9 Pro#15 of 18Full review
A budget 10 W open frame laser for engraving wood and leather and cutting thin stock. Fine for a garage, not a living room.
Amazon $269$26910 W400 x 410 mmNo - Ortur Laser Master 2 Pro S2#16 of 18Full review
A dependable older open frame 10 W engraver for hobbyists. Newer rivals are faster for similar money.
Amazon $299.99$299.9910 W390 x 410 mmNo - xTool F2#17 of 18Full review
For sellers who personalize small items on wood and metal, at home or at events. It is not a sheet cutter.
Amazon $1,149$1,14915 W115 x 115 mmNo - LaserPecker LP4#18 of 18Full review
For makers who personalize small metal and wood items and value speed and portability over cutting area.
Amazon $1,299$1,29910 W160 x 120 mmNo
