Euroboor ECO.36+ Low Profile Mag Drill
#10 in Up to 1 5/8 inFull review
The pick for beam flanges and tight spaces if you want the Euroboor safety electronics. The Hougen HMD130 is a close alternative.
Amazon $1,097.86$1,097.86
The Euroboor ECO.36+ Low Profile Mag Drill is the better magnetic drill overall, rated 3.3 to 3.1. The Euroboor ECO.36+ Low Profile Mag Drill leads on value and cutter size. The Euroboor ECO.36+ Low Profile Mag Drill costs $392.14 less ($1,097.86 vs $1,490).
Prices were last checked November 4, 2026. Product prices and availability are accurate as of that date and are subject to change; the price and availability shown on Amazon or the retailer's site at the time of purchase apply. As an Amazon Associate we earn from qualifying purchases.
Hougen HMD130 Low Profile Mag Drill
#12 in Up to 1 5/8 inFull review
Choose the HMD130 only for tight spaces where nothing taller fits. For general work the HMD900 cuts deeper for less.
Amazon $1,490$1,490
Which should you buy?
- Choose the Euroboor ECO.36+ Low Profile Mag Drill for value ($763.73 per inch of cutter ($1,097.86, 1 7/16 in) vs $1,083.64 per inch of cutter ($1,490, 1 3/8 in)) and cutter size (1 7/16 in largest annular cutter vs 1 3/8 in largest annular cutter).
Scores side by side
Each factor is scored 0-100 against the same fixed reference points for every up to 1 5/8 in magnetic drill; a clear win is highlighted. How we rank explains each one.
| Factor weight | Euroboor ECO.36+ Low Profile Mag Drill | Hougen HMD130 Low Profile Mag Drill |
|---|---|---|
| Overall rating | 3.3/5 | 3.1/5 |
| Value 30% | 30 $763.73 per inch of cutter ($1,097.86, 1 7/16 in) | 18 $1,083.64 per inch of cutter ($1,490, 1 3/8 in) |
| Cutter size 20% | 70 1 7/16 in largest annular cutter | 60 1 3/8 in largest annular cutter |
| Power 20% | 38 9.5 A, about 1,140 W at 120 V | 31 9 A, about 1,080 W at 120 V |
| Magnet 15% | 82 2,645 lbf stated magnet force | 50 magnet force not published (neutral score used) |
| Weight 15% | 50 weight not published (neutral score used) | 90 23.8 lb |
Specifications
| Euroboor ECO.36+ Low Profile Mag Drill | Hougen HMD130 Low Profile Mag Drill | |
|---|---|---|
| Drilling | ||
| Power | Corded, 120 V | Corded, 120 V |
| Motor | 9.5 A | 9 A |
| Largest annular cutter | 1 7/16 in | 1 3/8 in |
| Cutting depth | - | 1 in |
| Speed | Single speed, up to 700 rpm | Single speed, up to 450 rpm |
| Base and build | ||
| Magnet force (stated) | 2,645 lbf | - |
| Weight | - | 23.8 lb |
| Warranty | - | 2 years |