Mitsubishi Hyper-Heat GX 9,000 BTU

Last updated: October 22, 2026

Mitsubishi Hyper-Heat GX 9,000 BTU
4.4/5#9 of 27 in 9,000 BTU mini-splits
4.4

Mitsubishi’s mainstream Hyper-Heat line keeps its full rated heat at 5 °F and heats down to −13 °F. The FX goes further in deep cold and efficiency.

  • 9,000 BTUSize
  • 9,600 Btu/hHeat at 5 °F
  • 100%Kept at 5 °F
  • 10.2 / 28.4HSPF2 / SEER2
  • Pro installInstall
See it at Mitsubishi

No store we check sells it online; the maker lists where to buy or who installs it.

Pros
  • Keeps 100% of its rated heat at 5 °F: 9,600 Btu/h
  • 10-year parts and compressor warranty once registered
  • Very quiet indoor unit, rated from 19 dB(A)
Cons
  • Needs a licensed HVAC installer: a self-install voids the warranty

How it scores

The rating comes from 4 measured or published factors, each scored 0-100 against fixed reference points for its size. How we rank explains each one.

Specifications

Capacity (certified)
Size (nominal)9,000 BTU
Cooling at 95 °F9,000 Btu/h
Heating at 47 °F9,600 Btu/h
Heating at 17 °F (max)11,500 Btu/h
Heating at 5 °F (max)9,600 Btu/h
Heat kept at 5 °F100%
Efficiency (certified)
HSPF2 (Region IV)10.2
SEER228.4
EER215.4
COP at 5 °F1.80
ENERGY STARENERGY STAR Cold Climate
AHRI certificate216626287
Operating range
Heats down to-13 °F
Cooling range14 to 115 °F
Installation
Installed byProfessional (sold through installers)
Line set connectionFlare fittings (vacuum pump needed)
Line setup to 65 ft
Voltage230 V
RefrigerantR-454B
Indoor unitMSZ-GX09NL
Outdoor unitMUZ-GX09NLHZ
Build
Indoor noise19–43 dB(A)
Outdoor noise48 dB(A)
Wi-FiBuilt in
Weightindoor 23 lb / outdoor 77 lb
Warranty10 yr compressor, 10 yr parts
Warranty with DIY installNo, a licensed installer is required
Released2025-03

Alternatives in this size

Compare

Compare the Mitsubishi Hyper-Heat GX 9,000 BTU with any other mini-split →

More from Mitsubishi: every Mitsubishi product ranked.